When it comes to PV Interconnector, many people know this thing, but to say what is the use of interconnection belt, it is not necessarily everyone knows. In fact, to put it plainly, the interconnection tape is to connect the cells in series. Photovoltaic solar interconnection tape can be said to be an important raw…
DetailsPv ribbons are mainly divided into interconnection tapes and sink tapes in PV module applications. Interconnection tapes mainly include conventional flat tapes, MBB tapes, low temperature tapes, low resistance tapes, shaped tapes, etc.; sink tapes mainly include conventional sink tapes, perforated tapes, black tapes, bending tapes, etc. At present, the mainstream PV ribbon products on…
Detailspv ribbon are coated with a uniform layer of tin-based solder on the surface of copper tapes, which can be divided by application into interconnection tapes (connecting cells and soldering to them on grid lines) and sink tapes (connecting battery strings and junction boxes). Tinned copper tapes for photovoltaics generally consist of copper as the…
DetailsPv ribbon, also known as tinned copper tape or tinned copper tape, is an important component of PV modules and is used to connect PV cells during PV cell packaging. It directs the electrical energy converted from light on silicon wafers to electrical devices and plays an important role in conducting and aggregating electrical energy…
DetailsNickel is commonly used as a lithium-ion battery lug because it has sufficient combination of electrical conductivity, solderability, strength, malleability and corrosion resistance, strength, malleability, solderability and corrosion resistance. However, as the number of individual cells in a pack increases, one problem with nickel is heat generation (especially in the bus bar), which reduces the…
DetailsFlexible flat cable, or FFC, is any type of electrical cable that is both flat and flexible, with flat solid conductors. Flexible flat cables are a type of flexible electronics. However, the term FFC usually refers to the extremely thin flat cables often found in high-density electronic applications such as laptop computers and cell phones.…
DetailsNickel is commonly used as a lithium-ion battery lug because it has sufficient combination of electrical conductivity, solderability, strength, malleability and corrosion resistance, strength, malleability, solderability and corrosion resistance. However, as the number of individual cells in a pack increases, one problem with nickel is heat generation (especially in the bus bar), which reduces the…
DetailsThe shield can consist of a metal braid, or a metal or polyester foil. The shield can wrap all 4 twisted pairs, or just individual conductor pairs, or both the entire cable and individual conductor pairs. In the shield product code, the letter preceding the slash corresponds to the shield of the entire cable; the…
DetailsA cable shielding is a cable that contains an insulated conductor wrapped in a standard conductive layer. The shield can be made of braided copper wire (or similar metal), spiral copper tape, or some other conductive polymer. The importance of cable shieldings cannot be overemphasized. cable shieldings are usually thicker and stiffer than uncable shieldings.…
Detailscable shielding contain ordinary insulated conductors that are encapsulated in a standard conductive layer with a special protective shield. This shield distinguishes these cables from the normal unshielded variants. The shield is wrapped around the insulated conductors and is usually made of: Braided copper and similar metal strands Spiral copper tape Conductive polymer What does…
Details
